石墨烯/锌铁氧体复合物的制备及抗菌性能

用氧化还原法和化学共沉淀法分别制备了石墨烯(GE)和石墨烯/锌铁氧体(GE/ZnFe2O4)复合物,通过现代测试技术表征了样品的物相结构、组成和微观形貌.以大肠杆菌、金黄色葡萄球菌和白色念珠菌为测试菌种,分别对样品的抗菌性能进行了研究.结果表明,样品的抗菌活性受GE/ZnFe2O4复合物中GE和ZnFe2O4质量比(mG/Z)以及菌种的影响,其中mG/Z=0.4的复合物对三种菌均有较好的抗菌效果,其最小抑菌浓度分别为25、25和12.5μg/mL;复合物对白色念珠菌的抗菌效果最好,这与菌种的结构有关.此外,对样品的抗菌机理进行了详细研究.     

Effects of substrate and transfer on CVD-grown graphene over sapphire-induced Cu films

We differentiated the effects of Cu films deposited on single crystalline a-,r-,and c-plane sapphire substrates upon graphene films synthesized with atmospheric pressure chemical vapor deposition(CVD).The data illustrate that the realization of high-crystalline Cu film is dependent not only on the crystallinity of underlying substrate,but also on the symmetric match of crystallographic geometry between metal film and substrate.We also systematically investigated the effects of PMMA removal on the Raman ID/IG and IG/I2D values of transferred graphene.The results reveal that different PMMA removal methods do not alter the ID/IG values;instead,the residue of PMMA increases the IG/I2D values and the thermal decomposition of PMMA leads to higher IG/I2D values than the removal of PMMA with acetone.The effects of PMMA removal on variations of the Raman spectra are also discussed.     

Simultaneous removal of uranium and humic acid by cyclodextrin modified graphene oxide nanosheets

Cyclodextrin-modified graphene oxide nanosheets (denoted as CD/GO) were synthesized by an in-situ polymerization method and characterized by as well as Fourier transform-infrared spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and potentiometric acid-base titration. The characterization results indicated that CD was successfully grafted onto GO surfaces by forming a chemical bond. Mutual effects on the simultaneous removal of hexavalent uranium and humic acid by CD/GO from aqueous solution were investigated. The results indicated that U(VI) and humic acid (HA) sorption on CD/GO were greatly affected by pH and ionic strength. The presence of HA enhanced U(VI) sorption at low pH and reduced U(VI) sorption at high pH, whereas the presence of U(VI) enhanced HA sorption. The surface adsorbed HA acted as a “bridge” between U(VI) and CD/GO, and formed strong inner-sphere surface complexes with U(VI). Sorption isotherms of U(VI) or HA on CD/GO could be well fitted by the Langmuir model. This work highlights that CD/GO can be used as a promising material in the enrichment of U(VI) and HA from wastewater in U(VI) and humic substances obtained by environmental pollution cleanup.     

Highly oxidized graphene with enhanced fluorescence and its direct fluorescence visualization

We prepared hyper-oxidized graphene (HOG) as a form of graphene derivative by additional oxidation of graphene oxide (GO) sheets. HOG, which formed more functional groups and isolated conjugated clusters on the sheets, accordingly showed high solubility in water and alcohols, high transmittance and film transparence, longer fluorescence decay constant time, and enhanced fluorescence in states of solution and solid. By contrast, GO has much weaker fluorescence in solution and its fluorescence is totally quenched in solid. The influences of concentration, metallic ions, and pH on HOG fluorescence in aqueous solution were also investigated in detail. Due to HOG’s strong fluorescence, direct visualization was realized on substrates and in solution. In addition, direct 3D fluorescence visualizations of HOG phase in polymer composites were achieved. These results show the great potential of HOG in a broad range of applications, from biological labeling, probes, and drug carriers to high-performance composites and nanomanipulation.     

Excellent Performance of Few‐Layer Borocarbonitrides as Anode Materials in Lithium‐Ion Batteries

Borocarbonitrides (B_xC_yN_z) with a graphene‐like structure exhibit a remarkable high lithium cyclability and current rate capability. The electrochemical performance of the B_xC_yN_z materials, synthesized by using a simple solid‐state synthesis route based on urea, was strongly dependent on the composition and surface area. Among the three compositions studied, the carbon‐rich compound B_0.15C_0.73N_0.12 with the highest surface area showed an exceptional stability (over 100 cycles) and rate capability over widely varying current density values (0.05–1 A g^?1). B_0.15C_0.73N_0.12 has a very high specific capacity of 710 mA h g^?1 at 0.05 A g^?1. With the inclusion of a suitable additive in the electrolyte, the specific capacity improved drastically, recording an impressive value of nearly 900 mA h g^?1 at 0.05 A g^?1. It is believed that the solid–electrolyte interphase (SEI) layer at the interface of B_xC_yN_z and electrolyte also plays a crucial role in the performance of the B_xC_yN_z .     

Visible‐Light‐Induced Generation of H2 by Nanocomposites of Few‐Layer TiS2 and TaS2 with CdS Nanoparticles

Graphene analogues of TaS₂ and TiS₂ (3–4 layers), prepared by Li intercalation followed by exfoliation in water, were characterized. Nanocomposites of CdS with few‐layer TiS₂ and TaS₂ were employed for the visible‐light‐induced H₂ evolution reaction (HER). Benzyl alcohol was used as the sacrificial electron donor, which was oxidized to benzaldehyde during the reaction. Few‐layer TiS₂ is a semiconductor with a band gap of 0.7 eV, and its nanocomposite with CdS showed an activity of 1000 μmol h^?1 g^?1_. The nanocomposite of few‐layer TaS₂, in contrast, gave rise to higher activity of 2320 μmol h^?1 g^?1, which was attributed to the metallic nature of few‐layer TaS₂. The amount of hydrogen evolved after 20 and 16 h for the CdS/TiS₂ and CdS/TaS₂ nanocomposites was 14833 and 28132 μmol, respectively, with turnover frequencies of 0.24 and 0.57 h^?1, respectively.     

Tailored Synthesis of Various Nanomaterials by Using a Graphene‐Oxide‐Based Gel as a Nanoreactor and Nanohybrid‐Catalyzed CC Bond Formation

New graphene oxide (GO)‐based hydrogels that contain vitamin B₂/B₁₂ and vitamin C (ascorbic acid) have been synthesized in water (at neutral pH value). These gel‐based soft materials have been used to synthesize various metal nanoparticles, including Au, Ag, and Pd nanoparticles, as well as nanoparticle‐containing reduced graphene oxide (RGO)‐based nanohybrid systems. This result indicates that GO‐based gels can be used as versatile reactors for the synthesis of different nanomaterials and hybrid systems on the nanoscale. Moreover, the RGO‐based nanohybrid hydrogel with Pd nanoparticles was used as an efficient catalyst for C? C bond‐formation reactions with good yields and showed high recyclability in Suzuki–Miyaura coupling reactions.     

Chiral Monolithic Absorbent Constructed by Optically Active Helical‐Substituted Polyacetylene and Graphene Oxide: Preparation and Chiral Absorption Capacity

Chiral monolithic absorbent is successfully constructed for the first time by using optically active helical‐substituted polyacetylene and graphene oxide (GO). The preparative strategy is facile and straightforward, in which chiral‐substituted acetylene monomer (Ma), cross‐linker (Mb), and alkynylated GO (Mc) undergo copolymerization to form the desired monolithic absorbent in quantitative yield. The resulting monoliths are characterized by circular dichroism, UV–vis absorption, scanning electron microscopy (SEM), FT‐IR, Raman, energy‐dispersive spectrometer (EDS), X‐ray diffraction (XRD), Brunauer–Emmett–Teller (BET), XPS, and thermogravimetric analysis (TGA) techniques. The polymer chains derived from Ma form chiral helical structures and thus provide optical activity to the monoliths, while GO sheets contribute to the formation of porous structures. The porous structure enables the monolithic absorbents to demonstrate a large swelling ratio in organic solvents, and more remarkably, the helical polymer chains provide optical activity and further enantio‐differentiating absorption ability. The present study establishes an efficient and versatile methodology for preparing novel functional materials, in particular monolithic chiral materials based on substituted polyacetylene and GO.

     

Nanoscale imaging of oxidized copper foil covered with chemical vapor deposition-grown graphene layers

Characterization of the geometrical and structural characteristics of oxidized Cu area in high resolution is crucial for tracking the change in morphology, exploring interactions between graphene layers and Cu substrates and revealing the mechanism for the orientation-dependent oxidation of Cu. Here, we reported experimental results on nanoscale imaging of natural oxidation of the polycrystalline Cu substrate coated by partial-coverage chemical vapor deposition (CVD)-grown graphene stored in dryer under ambient conditions for up to 10 months. Scanning electron microscope (SEM), together with atomic force microscope (AFM), Raman, and X-ray photoelectron spectroscopy (XPS), was used for systematically studying the morphological and compositional changes at nanoscale during oxidation. The appearance of oxidized Cu substrates could be unambiguously distinguished from the unoxidized regions based on their distinctly different morphologies in SEM images, and the underlying mechanism was discussed in detail. By analyzing a millimeter-seized polycrystalline Cu substrate, we found that the oxidation of polycrystalline Cu substrate depends sensitively on both orientation of graphene layers and Cu substrates. Furthermore, the time-dependent oxidation evolution of Cu substrate was also established, and the oxidation rate was readily determined. The findings reported here will have important implications for developing protection coatings for Cu.     

ZIF-67/石墨烯复合物衍生的氮掺杂碳限域Co纳米颗粒用于高效电催化氧还原

燃料电池阴极氧还原(ORR)催化剂目前主要以商业Pt/C为主, 其高成本和稀缺性极大地限制了燃料电池的广泛应用. 为了替代Pt/C催化剂, 廉价高效的非贵金属催化剂目前受到了广泛的研究和关注. 利用氧化石墨烯(GO)为诱导模板, 借助表面丰富的含氧官能团, 实现了Co基金属有机框架材料(MOF) (ZIF-67)在GO表面的原位生长, 构筑了ZIF-67/GO层状复合材料. 热解过程中, 石墨烯的存在有效抑制了Co纳米颗粒的团聚, 并且很好地维持了原始的层状结构. 最终获得的Co@N-C/rGO复合催化剂材料实现了活性位的高度分散, 并且具有丰富的孔结构和优异的导电性能. 在电化学性能测试中Co@N-C/rGO表现出优异的ORR性能, 其起始电位为0.96 V, 半波电位0.83 V, 远优于ZIF-67直接热解得到的Co@N-C材料, 且性能与商业Pt/C催化剂相当. 此外, Co@N-C/rGO复合催化剂还表现出良好的催化稳定性和甲醇耐受性, 显示出该材料作为燃料电池氧还原催化剂的重要潜力.